TM 5-2420-230-24-1
c. Follow-On Maintenance.
(1)
Install front air bags (Para 6-5).
(2)
Install front check straps (Para 6-4).
(3)
Install front shock absorbers (Para 6-8).
(4)
Install front differential breather (Para 14-8).
(5)
Install front drive shaft (Para 14-5).
(6)
Uncage front brakes (Para 8-8).
(7)
Install front tires (TM 5-2420-230-10).
(8)
Remove maintenance arm and lower FEL (TM 5-2420-230-10).
(9)
Install center belly plate (TM 5-2420-230-10).
(10) Align front end (Para 5-17).
(11) Remove "Do Not Operate" tag from ignition switch (TM 5-2420-230-10).
END OF TASK
14-7. REAR AXLE ASSEMBLY REPLACEMENT.
This Task Covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Test Equipment
Equipment Conditions
None
TM or Para
Condition Description
FEL raised and maintenance
arm installed.
Tools and Special Tools
Tool kit, common no. 2, Item 36, Appendix B
Air system drained.
Tool kit, general mechanics, Item 38, Appendix B
Rear tires removed.
Rear brakes caged.
Rear drive shaft removed.
Materials/Parts
Cap and plug set, Item 4, Appendix C
Rear differential breather
Tags, identification, Item 63, Appendix C
removed.
Ties, cable, Item 68, Appendix C
Rear shock absorbers removed.
Rear check straps removed.
Rear air bags removed.
Personnel Required
MOS 62B, Construction Equipment Repairer (3)
Sway bar removed.
References
Drawings Required
None
TM 5-2420-230-24P Figure 102
Estimated Time to Complete
Refer to MAC in Appendix B
Change 1