TM 5-2420-230-24-1
c. Follow-On Maintenance.
(1)
Install rear air bags (Para 6-5).
(2)
Install rear check straps (Para 6-4).
(3)
Install rear shock absorbers (Para 6-8).
(4)
Install rear differential breather (Para 14-8).
(5)
Install rear drive shaft (Para 14-5).
(6)
Uncage rear brakes (Para 8-8).
(7)
Install rear tires (TM 5-2420-230-10).
(8)
Remove maintenance arm and lower FEL (TM 5-2420-230-10).
(9)
Install center belly plate (TM 5-2420-230-10).
(10) Remove "Do Not Operate" tag from ignition switch (TM 5-2420-230-10).
END OF TASK
14-8. AXLE HOUSING BREATHER REPLACEMENT.
This Task Covers:
a. Removal
b. Cleaning
c. Installation
d. Follow-On Maintenance
INITIAL SETUP
Test Equipment
Equipment Conditions
None
TM or Para
Condition Description
Vehicle positioned on level
ground.
Tools and Special Tools
Tool kit, general mechanics, Item 38, Appendix B
Parking brake applied.
Engine shut OFF.
Electrical master switch OFF.
Materials/Parts
Cloth, lint-free, Item 10, Appendix C
"Do Not Operate" tag attached
Compound, sealing, pipe thread, Item 23, Appendix C
to ignition switch.
Solvent, degreasing SD, Item 58, Appendix C
Hood raised.
Personnel Required
Drawings Required
MOS 62B, Construction Equipment Repairer
TM 5-2420-230-24P Figure 98
TM 5-2420-230-24P Figure 99
References
None
Estimated Time to Complete
Refer to MAC in Appendix B
Change 1
