TM 5-2420-230-24-1
14-3. RESTORE IHMEE TO OPERATIONAL READINESS.
Upon completion of maintenance activities, restore power and return vehicle to operational readiness using following
procedure:
(1)
Place electrical master switch in ON position (TM 5-2420-230-10).
(2)
Remove "Do Not Operate" tag from ignition switch (TM 5-2420-230-10).
(3)
Ensure parking brake is applied (TM 5-2420-230-10).
(4)
Start engine (TM 5-2420-230-10).
(5)
Raise FEL, remove maintenance arm, and lower FEL to ground or travel position as required
(6)
Complete necessary documents and return IHMEE to relevant authority.
14-4. AXLE HUB AND DIFFERENTIAL OIL SERVICING.
This Task Covers:
a. Changing Axle Hub Oil
b. Changing Differential Oil
c. Follow-On Maintenance
INITIAL SETUP
Test Equipment
Equipment Conditions
None
TM or Para
Condition Description
Vehicle raised.
Parking brake released.
Tools and Special Tools
Pan, drain, Item 29, Appendix B
Tool kit, common no. 2, Item 36, Appendix B
Drawings Required
Tool kit, general mechanics, Item 38, Appendix B
Figure 98
Figure 99
Figure 100
Materials/Parts
Chock, wheel, Item 7, Appendix C
Figure 101
Oil, lubricating, gear, GO 80W/90,
Figure 102
Item 42, Appendix C
Figure 103
Personnel Required
Estimated Time to Complete
MOS 62B, Construction Equipment Repairer
Refer to MAC in Appendix B
References
None
Change 1