TM 5-2420-230-24-1
18-4. FORKLIFT TINES REPLACEMENT.
This Task Covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Test Equipment
Equipment Conditions
None
TM or Para
Condition Description
TM 5-2420-230-10 4-in-1 bucket removed from
vehicle.
Tools and Special Tools
None
TM 5-2420-230-10 Forklift attachment installed on
vehicle.
TM 5-2420-230-10 Vehicle positioned on level
Materials/Parts
None
ground.
TM 5-2420-230-10 Parking brake applied.
TM 5-2420-230-10 Engine shut OFF.
Personnel Required
MOS 62B, Construction Equipment Repairer (2)
TM 5-2420-230-10 Electrical master switch OFF.
TM 5-2420-230-10 "Do Not Operate" tag attached to
ignition switch.
References
None
Drawings Required
TM 5-2420-230-24P Figure 177
Estimated Time to Complete Task
Refer to MAC in Appendix B
a. Removal.
(1)
Lift tab (1) on top of left-hand forklift
tine (2).
(2)
Slide forklift tine (2) to center detent (3) of
frame (4).
Forklift tine is heavy. Use an assistant and
follow safe working procedures when
removing or installing forklift tine. Failure to
comply may result in injury to personnel.
(3)
With the aid of an assistant, pull bottom of
forklift tine (2) forward; then lift tine off
frame (4).
(4)
Repeat steps (1)) through (3)) for right-hand
tine.