TM 5-2420-230-24-1
H-6. BUCKET AND DIPPER HYDRAULIC CYLINDER REPAIR.
This Task Covers:
a. Disassembly
b. Inspection
c. Assembly
d. Follow-On Maintenance
INITIAL SETUP
Test Equipment
References
None
None
Tools and Special Tools
Equipment Conditions
Field maintenance, artillery, Item 22.1, Appendix B
TM or Para
Condition Description
Tool kit, general mechanics, Item 38, Appendix B
Bucket cylinder removed
(as required).
Dipper cylinder removed
Material/parts
Cloth, abrasive, Item 8.1, Appendix C
(as required).
Cloth, lint-free, Item 10, Appendix C
Compound, sealing, Loctite 242, Item 19, Appendix C
Drawings Required
Compound, sealing, Loctite 243, Item 20, Appendix C
TM 5-2420-230-24P Figure 168
Dexron III, Item 27, Appendix C
TM 5-2420-230-24P Figure 172
Kit, seal, Item 96.1, Appendix D (Bucket cylinder)
Kit, seal, Item 96.4, Appendix D (Dipper cylinder)
Estimated Time to Complete Task
Solvent, degreasing, Item 58, Appendix C
Refer to MAC in Appendix B
Personnel Required
MOS 62B, Construction Equipment Repairer
a. Disassembly.
Hydraulic cylinders are heavy. To avoid personal injury, exercise extreme care when manually
handling the cylinders. Failure to comply may result in serious injury or death to personnel.
Hydraulic fluid (Dexron III) is TOXIC. Wear protective goggles and gloves; use only in well-
ventilated area; avoid contact with skin, eyes, and clothes. Skin and clothing that come in contact
with hydraulic oil should be washed immediately. Saturated clothing should be removed
immediately. Failure to comply may result in injury or death to personnel.
NOTE
The bucket and dipper cylinders are disassembled in a similar manner.
Use the appropriate tools found in the Artillery Field Maintenance shop set in place of the special
tools listed in the vendor instructions.
Refer to page H-13 for disassembly procedures.
Change 1
