TM 5-2420-230-24-1
d. Installation.
Use care when removing or installing snap and retaining rings. Snap and retaining rings are under
spring tension and can act as projectiles when released and could cause severe eye injury.
Refer to page J-100 for final assembly and installation of the complete brake assembly.
e. Follow-On Maintenance.
Install hub (Para J-10).
END OF TASK
J-12. REAR BRAKE SHOE REPLACEMENT.
This Task Covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Test Equipment
Personnel Required
None
MOS 62B, Construction Equipment Repairer
Tools and Special Tools
References
Equipment, suitable lifting
None
Field, maintenance, basic, Item 23, Appendix B
Equipment Conditions
Tool kit, common no. 2, Item 36, Appendix B
TM or Para
Condition Description
Tool kit, general mechanics, Item 38, Appendix B
Brake drum removed.
Materials/Parts
Drawings Required
Cloth, lint-free, Item 10, Appendix C
Grease, automotive and artillery, Item 30, Appendix C
TM 5-2420-230-24P Figure 137
Pin, Split, Item 174.1, Appendix D (4)
Estimated Time to Complete Task
Wire, nonelectrical lock, Item 70, Appendix D
Refer to MAC in Appendix B
Use care when removing or installing snap and retaining rings. Snap and retaining rings are under
spring tension and can act as projectiles when released and could cause severe eye injury.
a. Removal.
Refer to page J-97 to remove the brake shoes.
b. Installation.
Refer to page J-100 to install the brake shoes.
Change 1
