TM 5-2420-230-24-2
Section 0 - Engine Disassembly and Assembly - Group 00
Flywheel Housing - Installation (0-95)
B Series Shop Manual
Page 0-89
Flywheel Housing - Installation (0-95)
If removed, install the two ring dowels.
Drive the dowels in until they are against the bottom of the
bore.
Install the rectangular seal and lubricate with Lubriplate
1
05..
15 mm
Install the flywheel housing.
Torque Value: 77 Nm
[57 ft-lb]
Flywheel - Installation (0-96)
Install the flywheel.
Caution: Install two capscrews in the front of the crank-
shaft or otherwise lock the crankshaft to tighten the
flywheel capscrews. Do not use the timing pin to lock the
engine.
L-178