TM 5-2420-230-24-2
Section 0 - Engine Disassembly and Assembly - Group 00
Injection Pump - Installation (0-88)
B Series Shop Manual
Page 0-87
30 mm
Install the retaining nut and washer.
Torque Value: 15 Nm
[11 ft-lb]
To prevent damage to the timing pins, do not exceed the
torque value given. This is not the final torque value for
the retaining nut.
Disengage the engine timing pin.
24 mm
Remove the fuel pump timing pin plug, Reverse the po-
sition of the pin and install the pin, plug, and sealing
washer.
Torque Value: 15 Nm
[11 ft-lb]
30 mm
Tighten the fuel pump drive nut.
Torque Value: 165 Nm
[122 ft-lb]
Install the gear cover access cap hand tight.
L-176