TM 5-2420-230-24-2
Engine Dataplate (001-057)
B3.9 and B5.9 Series Engines
Page 1-108
Section 1 - Cylinder Block - Group 01
Engine Dataplate (001-057)
Remove (001-057-002)
Remove the rivets that secure the dataplate to the gear
housing.
Install (001-057-026)
Drive the rivets in until they contact the dataplate.
CAUTION
If the rivets are driven in too far, they will cut through
the dataplates.
2.0-mm Drill Bit
If the dataplate is loose or has been damaged, drill new
holes, and attach with new rivets. Mark the drill bit at 6.0
mm [0.236 in] to avoid drilling too deeply into the gear
housing.
L-786
