Fuel Shutoff Valve (005-043)
B3.9 and B5.9 Series Engines
Section 5 - Fuel System - Group 05
``Package'' the solenoid, o-ring, spring, and plunger.
Connect the electric wire.
Install new insulating tubes onto the terminals on the ter-
minal studs of the new solenoid.
Install the valve into the cover.
Install the cover and gasket onto the fuel injection pump.
With the tool installed as shown, place the cover in position
on the pump housing. Twist the tool to release it, and slide
it out from between the cover and the housing.
NOTE: Extreme care must be taken in assembling the
cover to a fuel injection pump to make sure the shutoff arm
is in proper contact with the linkage hook tab.