TM 5-2420-230-24-2
B3.9 and B5.9 Series Engines
Fuel Lift Pump (005-045)
Section 5 - Fuel System - Group 05
Page 5-75
In the event that the service tool is not available, the gov-
ernor cover should be installed as follows:
Move the shutoff lever to the stop position.
Install the cover to pump at a downward angle from the
drive shaft end of the fuel injection pump; then slide the
cover horizontally into position.
Torque Value: 4.6 Nm
[41 in-lb]
Fuel Lift Pump (005-045)
Preparatory (005-045-000)
Clean debris from the fuel line fittings and the fuel
transfer pump.
Disconnect the low-pressure fuel lines. Refer to Pro-
cedure 006-024.
Remove (005-045-002)
10 mm
Diaphragm Style
Remove the fuel transfer pump, and complete the following
steps.
14 mm, 17 mm, 20 mm
Fuel Transfer Pump (Piston Style)
Disconnect the fuel line from the fuel transfer pump and
fuel filter head.
Use two wrenches to disconnect the fuel line from the fuel
transfer pump.
L-935