TM 5-2420-230-24-2
Cold Start Timing Advance System (KSB) Remote (005-046)
B3.9 and B5.9 Series Engines
Page 5-92
Section 5 - Fuel System - Group 05
Resistance Check (005-046-038)
The wiring harness used on the wax motor-style KSB can
be inspected using a multimeter.
NOTE: Pin C of the metro-pack connector is blank on the
wax motor style KSB wiring harness.
Use a multimeter to perform a continuity check between
port A of the metro-pack connector and the female spade
connector at the fuel pump shutdown solenoid connector.
Repair the wire if there is an open circuit.
Ohms Resistance - Less than 10.
Use a multimeter to perform a continuity check between
port B of the metro-pack connector and the female spade
connector at the KSB wax motor connector.
Repair the wire if there is an open circuit.
Ohms Resistance - Less than 10.
Engines with CPL 1579 do not have a resistor in the
harness.
L-952
