TM 5-2420-230-24-2
B3.9 and B5.9 Series Engines
Engine Mounts (016-010)
Section 16 - Mounting Adaptations - Group 16
Page 16-23
WARNING
To avoid severe burns, wear protective gloves when
installing the heated gear.
NOTE: The ring gear must be installed so the bevel on the
teeth is toward the crankshaft side of the flywheel.
Install the ring gear.
Barring Tool, Part No. 3824591
Use two capscrews and the barring tool, Part No. 3824591,
in the front of the crankshaft to hold the crankshaft when
the flywheel capscrews are being tightened.
Tighten the capscrews in the sequence shown.
Torque Value: 137 Nm
[101 ft-lb]
Engine Mounts (016-010)
Inspect for Reuse (016-010-007)
Inspect all rubber-cushioned mounts for cracks or damage.
Inspect all mounting brackets for cracks or damaged bolt
holes.
NOTE: Damaged engine mounts and brackets can cause
engine misalignment and driveline component damage,
and result in vibration complaints.
L-1351