TM 5-2420-232-10
0005
4-IN-1 BUCKET OPERATIONS CONTINUED
Grading Operation
0001
0005
1.
The bucket can be used to level an uneven surface by removing material from high spots and depositing the removed
material into the troughs.
2.
Open the clam (Figure 17, Item 1).
3.
When operating the machine forwards position the bucket as shown (Figure 17). When operating the machine in reverse
position the bucket as shown (Figure 18).
4.
Put the transmission in first gear forward or reverse as applicable. Drive the machine straight over the surface to be graded
and at the same time raise or lower the bucket to obtain the best grading result.
435-A1774
Figure 17. Grading Operation - Forward Travel
05
Figure 18. Grading Operation - Reverse Travel
05
0005-18
