TM 5-2420-232-10
0048
SANDBAGGER CONTROLS CONTINUED
Attaching Sandbags - Continued
00048
2.
Operate auxiliary control lever to apply tension to sandbags.
3.
Check bag tension. If bags don t stay in place, release hydraulic tension from bags
4.
Loosen nut (Figure 2, Item 2) and adjust bolt (Figure 2, Item 1) by one rotation at a time - clockwise provides more ten-
sion, counter-clockwise provides less tension.
5.
Tighten nut (Figure 2, Item 2) on bolt (Figure 2, Item 1).
6.
Apply tension to sandbags again.
7.
Repeat steps 3 and 4.
8.
If proper tension cannot be achieved, contact Field Maintenance.
Figure 2. Adjusting Arm Tension
048
0048-4