• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
CHECK PUMP DRIVE GEARBOX OIL LEVEL
CHANGE ENGINE OIL AND REPLACE FILTER - Continued

Operator Manual For Hydraulic Excavator Model 230Lcr And Model 230Lcrd With Rock Drill
Page Navigation
  202    203    204    205    206  207  208    209    210    211    212  
img
TM 5-3805-280-10
Maintenance--Every 250 Hours
CHANGE ENGINE OIL AND REPLACE
FILTER
IMPORTANT: If fuel sulfur content exceeds 0.5
percent, change the engine oil at 1/2 the
normal interval.
NOTE: If engine has not run 250 hours before the season
changes, change oil.
1. Run engine to warm oil.
2. Park machine on a level surface.
3. Lower bucket to the ground.
4. Turn auto-idle switch off.
IMPORTANT: Turbocharger may be damaged if
engine is not properly shut down.
5. Run engine with engine rpm dial at 1/3 position without
load for 2 minutes.
6. Move engine rpm dial to slow idle position.
7. Turn key switch to OFF. Remove key from switch.
8. Attach a 'Do Not Operate' tag on the right control lever.
9. Pull pilot control shut-off lever to locked position.
Continued on next page
TX,OUOE042,26
1908MAR991/2
14-3


Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved.