TM 5-3805-280-24-1
Hydraulic System
DISASSEMBLE AND ASSEMBLE ROTARY
MANIFOLD
1. Mark spindle (B), housing (F), and cover (K) to aid in
assembly.
02
0260
2. Remove cap screws (L) and cover (K). Inspect O-ring
36
(J) and replace if necessary.
3. Remove snap ring (I) and ring (H).
4. Carefully, remove spindle assembly (A--F) from
housing (G).
5. Remove plugs in spindle to clean ports. Install plugs.
6. Remove O-ring (D), seal (C), oil seal rings (F) and
bushing (E) from housing (G).
A--Plug
B--Spindle
C--Dust Seal
D--O-Ring
E--Bushing
F--Oil Seal Rings (6 used)
G--Housing
H--Ring
I--Snap Ring
J--O-Ring
K--Cover
L--Cap Screw
Continued on next page
TX,02,VV2723 1918SEP981/2
12-58