TM 5-3805-280-24-1
Hydraulic System
00--Hose (2 used)
16A--O-Ring (2 used)
32--Hose Clamp (2 used)
43B--Hose
01--Hose (2 used)
21--Hose (2 used)
35--Cap Screw (2 used)
44A--Hose Protector
04--Adapter (4 used)
22--Adapter (2 used)
37--Tie Band (4 used)
44B--Hose
04A--O-Ring (4 used)
22A--O-Ring (2 used)
38A--Hose Protector
45--O-Ring (4 used)
05--Adapter (4 used)
23--Adapter (2 used)
38B--Hose
46--Adapter (2 used)
05A--O-Ring (4 used)
23A--O-Ring (2 used)
39--O-Ring (4 used)
47--Adapter (2 used)
02
08--O-Ring (8 used)
27--Rubber Bushing (2
40--Cap Screw (16 used)
47A--O-Ring (2 used)
0260
14--Hose (2 used)
used)
41--Split Flange (8 used)
33
15--Tee Fitting
28--Rubber Bushing 2
42A--Hose Protector
15A--O-Ring
used)
42B--Hose
16--elbow (2 used)
31--Hose Clamp (2 used)
43A--Hose Protector
9. Raise rotary manifold into position. Tighten
5. Disconnect hoses (00, 01, and 21) from each side
flange-to-mainframe cap screws.
of rotary manifold.
Manifold-to-Frame Cap Screw--Specification
6. Disconnect hoses (38B, 42B, 43B, and 44B) from
top of rotary manifold.
Torque....................................................................... 34 Nm (25 ft-lb)
7. Remove rotary manifold-to-mainframe cap screws.
10. Connect all hoses to appropriate ports.
Lower rotary manifold.
8. Replace parts as necessary.
Continued on next page
TX,02,VV2722
1918SEP985/7
12-55
