TM 5-3805-280-24-2
Removal and Installation
IMPORTANT: DO NOT move delivery valve fittings
while tightening line nuts. If delivery
valve and barrel housing rotate while
tightening a fuel line nut, injection
pump fuel delivery will be altered. The
injection pump will have to be
recalibrated on a test stand at an
authorized diesel repair station.
NOTE: Remove protective caps and plugs that were
installed on fuel system components during
04
0400
injection pump removal.
17
A--Fuel Delivery Lines
11. Connect fuel delivery lines (A). Tighten line nuts.
Fuel Delivery Line Nut--Specification
Torque ............................................................................. 27 Nm (20 lb-ft)
TX,04,UU3876
1918SEP984/6
12. Connect fuel tank-to-transfer pump line (B).
13. Connect transfer pump-to-fuel filter line (C).
14. Connect fuel inlet line (D) and fuel leak-off line (E).
15. Connect injection pump lubrication line (A) to cylinder
block fitting.
16. Before connecting fuel shut-off solenoid linkage,
check adjustment. (See Check and Adjust Fuel
Shut-Off Solenoid Linkage in Group 0515.)
A--Injection Pump Lubrication Line
B--Fuel Tank-to-Transfer Pump line
C--Transfer Pump-to-Fuel Filter Line
D--Fuel Inlet Line
E--Fuel Leak-off Line
Continued on next page
TX,04,UU3876
1918SEP985/6
13-17