TM 5-3805-280-24-2
Lubrication System
20
9. Install new O-ring (A) on neck of pick-up tube. Install
28
pick-up tube.
A--O-Ring
RG,20,DT7520 1917NOV973/4
NOTE: Idler gear cap screw threads (5) must be
lubricated.
10. Tighten four cap screws and lower idler gear cap
screw to specified torque according to sequence
shown.
Oil Pump-to-Front Plate and Oil Pump Pick-Up Tube Cap Screws--
Specification
Torque ............................................................................. 35 Nm (26 lb-ft)
Oil Pump Lower Idler Gear Cap Screw (Lubricated Threads)--
Specification
Torque ............................................................................. 70 Nm (53 lb-ft)
Viewed from Rear of Engine
RG,20,DT7520 1917NOV974/4
13-321
