TM 5-3805-280-24-2
Lubrication System
20
3. Check housing and cover bore ID and shaft OD.
24
Inspect cover and housing for evidence of gear rub.
Light contact is acceptable.
4. Measure bushing ID in housing and bore in cover.
Oil Pump Drive Shaft--Specification
OD ............................................................................. 16.017--16.037 mm
(0.6306--0.6314 in.)
Oil Pump Bushing in Housing--Specification
ID ............................................................................... 16.052--16.102 mm
(12.316--12.332 in.)
RG,20,DT7523 1917NOV974/5
5. Measure idler shaft OD and idler gear ID
Oil Pump Idler Shaft--Specification
OD ............................................................................. 12.316--12.332 mm
(0.4849--0.4855 in.)
Oil Pump Idler Gear--Specification
ID ............................................................................... 12.355--12.363 mm
(0.4864--0.4867 in.)
RG,20,DT7523 1917NOV975/5
13-317
