TM 5-3805-280-24-2
Hydraulic System
Oil Tank Elbow-to-Suction Line Worm Gear Type Clamp--
IMPORTANT: Hydraulic pump will be damaged if
Specification
not filled with oil before starting.
Procedure must be performed to fill
Torque.................................................... 5.9--6.9 Nm (52--61 lb-in.)
pump housing whenever oil has
been drained from the pump or
14. Connect wiring harness connectors.
hydraulic oil tank.
15. Add hydraulic oil to tank until it is between marks
16. Do the Hydraulic Pump Start-Up Procedure. (See
on sight glass. (See Hydraulic Oil in Group 0004.)
Hydraulic Pump Start-Up Procedure in this group.)
TX,33,UU3804
1921SEP986/6
33
3360
121
21-153