TM 5-3805-281-10
Maintenance--Every 250 Hours
CLEAN DUSTY PRIMARY ELEMENT
1. Tap element with the palm of your hand, NOT ON A
HARD SURFACE.
CAUTION: Prevent possible injury from flying
chips if compressed air is more than 210 kPa
(2.1 bar) (30 psi). Reduce compressed air to
less than 210 kPa (2.1 bar) (30 psi) when using
for cleaning purposes. Clear area of bystanders,
guard against flying chips, and wear personal
protection equipment including eye protection.
2. If this does not remove dust, use compressed air under
210 kPa (2.1 bar) (30 psi).
Compressed Air--Specification
Pressure ................................................ Under 210 kPa (2.1 bar) (30 psi)
3. Direct air up and down the pleats from inside to
outside. Be careful not to make a break in the element.
03T,55,MM11
1918NOV921/1
