TM 5-3805-281-24-1
Track System
ADJUST TRACK SAG
1. Swing upperstructure to side. Lower boom to raise
track off the ground. Keep the angle between boom
and arm at 90--110 with the round side of bucket on
01
the ground.
0130
32
CAUTION: Prevent possible injury from
unexpected machine movement. Put blocks or
shop stands under machine frame to support
machine while measuring track sag.
The approximate weight of 330LCR is 33 049 kg
(72,864 lb).
Machine--Specification
Weight...................................................................... 33 049 kg (72,864 lb)
approximate
2. Put blocks or shop stands under machine for support.
3. Slowly turn track forward two revolutions and then in
reverse two revolutions. Stop track while moving in
reverse direction so all track sag is at bottom.
CED,OUOE023,132
1922MAY981/3
4. Measure track sag (A) at center track roller from the
bottom of track frame to the top surface of track shoe.
Track Sag--Specification
Distance.................................................... 340--380 mm (13.375--15 in.)
A--Track Sag
Continued on next page
CED,OUOE023,132
1922MAY982/3
