TM 5-3805-281-24-1
Hydraulic System
PARK BRAKE RELEASE SHUTTLE VALVE
NOTE: Valve can be removed with propel motor on
machine.
Clean threads of seat (B) using cure primer. Apply thread
lock and sealer (high strength) to threads.
Install ball (C) and seat (B). Tighten seat (B) using an 8
mm hex key wrench.
02
0260
Ball Seat--Specification
26
Torque ....................................................................... 14.5 Nm (128 lb-in.)
A--Plug with O-Ring
B--Ball Seat
Install and tighten plug and O-ring (A).
C--Ball
Park Brake Release Shuttle Valve Plug--Specification
Torque ....................................................................... 14.5 Nm (128 lb-in.)
CED,OUOE023,175
1901JUN982/7
SERVO PISTON OPERATING SHUTTLE VALVE
NOTE: Valve can be removed with propel motor on
machine.
Clean threads of seat (B) using cure primer. Apply thread
lock and sealer (high strength) to threads.
Install ball (C) and seat (B). Tighten seat (B) using an 8
mm hex key wrench.
Ball Seat--Specification
Torque ....................................................................... 14.5 Nm (128 lb-in.)
A--Plug with O-Ring
B--Ball Seat
Install and tighten plug and O-ring (A).
C--Ball
Servo Piston Operating Shuttle Valve Plug--Specification
Torque ....................................................................... 14.5 Nm (128 lb-in.)
Continued on next page
CED,OUOE023,175
1901JUN983/7
10-65