TM 5-3805-281-24-2
Cylinder Block, Liners, Pistons, and Rods
RECHECK CYLINDER LINER STANDOUT
(HEIGHT ABOVE BLOCK)
NOTE: If a new liner assembly is being installed in a new
or used cylinder block, liner height must be
checked.
Be sure liner bore in cylinder block and top deck of block
are clean.
Install liners without packing. Secure with cap screws and
washers and measure liner standout. See MEASURE
CYLINDER LINER STANDOUT (HEIGHT ABOVE
BLOCK), earlier in this group.
Liner shims may be used to bring standout within
specification. (See INSTALL LINER SHIMS--IF
REQUIRED, later in this group.)
RG,RG34710,1137
1923OCT971/1
