TM 5-3805-281-24-2
Wiring Harness and Switches
IMPORTANT: Carefully spread contact lances to
assure good seating on connector
body.
NOTE: Connector bodies are "keyed" for proper contact
mating. Be sure contacts are in proper alignment.
4. Push contact into new connector body until fully
seated.
5. Pull on wire slightly to be certain contact is locked in
place.
6. Transfer remaining wires to correct terminal in new
connector.
7. Close connector body.
ECONN,O
1903NOV942/2
16
1674
20
15-50
