TM 5-3805-294-10
0030
STARTING - Continued
2
HYEX01420
Figure 8. Engine Speed Dial.
Ensure engine coolant and hydraulic oil temperatures are above 0F (-18C) before proceeding to Step 12.
11.
Monitoring
0 oC
Hydraulic Oil Temperature
0 oC
Coolant Temperature (E)
Actual Engine Speed
0
0 oC
Fuel Temperature
ON
1
2
3
4
5
6
7
8
9
0
F1
F2
F3
F4
HYEX01418
Figure 9.
Check Engine and Hydraulic Oil Temperatures.
NOTE
During warm-up procedures, if the upper structure is over the side and the boom cylinders
are fully raised, the overload alarm may sound even if the machine is not in an overload
condition. Lower the boom cylinders until the alarm is no longer displayed.
Set machine switch selections for temperatures between 5 and 32F (-15 and 0C) per Table 1.
12.