TM 5-3805-294-10
0032
SLAVE STARTING - Continued
2
1
HYEX00866
Figure 1. Slave Receptacle.
4.
Connect slave cable to slave receptacle (Figure 1, Item 2).
5.
Run booster vehicle at a speed just above idle. Refer to booster vehicle Operator's Manual.
6.
Start engine. (WP 0007)
7.
After starting machine, return booster vehicle to idle. Refer to booster vehicle Operator's Manual.
8.
Remove the slave cable from slave receptacle (Figure 1, Item 2).
9.
Install cap (Figure 1, Item 1) to slave receptacle (Figure 1, Item 2).
10.
Remove slave cable from booster vehicle.
END OF TASK
END OF WORK PACKAGE