TM 5-3805-294-10
OPERATOR MAINTENANCE
TRACK SAG CHECK
INITIAL SETUP:
References (cont.)
Tools and Special Tools
Measuring Tape (WP 0095, Table 2, Item 10)
Materials/Parts
Grease (WP 0097, Table 1, Item 10)
Rags, Wiping (WP 0097, Table 1, Item 15)
Equipment Condition
Engine running. (WP 0007)
Personnel Required
Horizontal Construction Engineer 12N (2)
Time to Complete
0.5 Hour(s)
References
DA FORM 5988-E or DA FORM 2404 (WP 0094)
RAISING MACHINE
NOTE
Sag for left and right side tracks is checked the same way.
1.
Swing upperstructure (Figure 1, Item 1) 90 degrees.
3
4
1
5
2
HYEX00383
Figure 1. Raise Machine.
2.
Place round side of bucket (Figure 1, Item 2) on ground.
3.
Keeping angle between boom (Figure 1, Item 3) and arm (Figure 1, Item 4) between 90 and 110 degrees,
slowly lower boom (Figure 1, Item 3) to raise track (Figure 1, Item 5) off ground.
END OF TASK