TM 5-3805-294-10
OPERATOR MAINTENANCE
TIGHTENING TRACK TENSION
INITIAL SETUP:
Tools and Special Tools
References
Grease Gun (WP 0095, Table 2, Item 4)
DA FORM 5988-E or DA FORM 2404 (WP 0094)
Materials/Parts
Grease (WP 0097, Table 1, Item 10)
Equipment Condition
Rags, Wiping (WP 0097, Table 1, Item 15)
Track sag checked. (WP 0080)
Time to Complete
Personnel Required
Horizontal Construction Engineer 12N
0.1 Hour(s)
TIGHTENING TRACK
1.
Add a small amount of grease to grease fitting (Figure 1, Item 1).
HYEX00384
1
Figure 1. Tighten Track.
2.
Check track sag. (WP 0080)
END OF TASK
END OF WORK PACKAGE
0081-1/2 blank