TM 5-3805-294-10
OPERATOR MAINTENANCE
TAKING HYDRAULIC OIL SAMPLE
INITIAL SETUP:
Materials/Parts
Equipment Condition
Bottle, Oil Sample (WP 0097, Table 1, Item 3)
Engine running. (WP 0007)
Rags, Wiping (WP 0097, Table 1, Item 15)
Time to Complete
0.2 Hour(s)
Personnel Required
Horizontal Construction Engineer 12N (1)
References
DA FORM 5988-E or DA FORM 2404 (WP 0094)
SAMPLING HYDRAULIC OIL
1.
Clean dirt from around cap (Figure 1, Item 1).
3
1
2
HYEX00908
Figure 1. Hydraulic Oil Sampling Valve.
2.
Remove cap (Figure 1, Item 1) from sampling valve (Figure 1, Item 2).
3.
Turn valve (Figure 1, Item 3) and fill sampling bottle until it is at least 3/4 full.
4.
Release valve (Figure 1, Item 3).
5.
Install cap (Figure 1, Item 1) to sampling valve (Figure 1, Item 2).
END OF TASK
END OF WORK PACKAGE
0083-1/2 blank