TM 5-3805-294-10
OPERATOR MAINTENANCE
LOOSENING TRACK TENSION
INITIAL SETUP:
Tools and Special Tools
References
Wrench, Open End, 24 mm
DA FORM 5988-E or DA FORM 2404 (WP 0094)
(WP 0095, Table 2, Item 4)
Materials/Parts
Equipment Condition
Rags, Wiping (WP 0097, Table 1, Item 15)
Track sag checked. (WP 0080)
Personnel Required
Time to Complete
Horizontal Construction Engineer 12N
0.1 Hour(s)
LOOSENING TRACK TENSION
1.
Loosen nut (Figure 1, Item 1) and allow a small amount of grease to escape.
1
HYEX00385
Figure 1.
Loosen Track.
2.
Tighten nut (Figure 1, Item 1).
3.
Check track sag. (WP 0080)
END OF TASK
END OF WORK PACKAGE
0082-1/2 blank