TM 5-3805-294-23-1
0036
Table 1. DTC 110.17 - Coolant Temperature Signal Slightly Low - Continued.
Test or Inspection
Corrective Action
Malfunction
10.
When finished monitoring,
select Readings and select
Disconnect From Model(s).
(Volume 3, WP 0363)
11.
Select Yes to terminate your
readings connection. (Volume
3, WP 0363)
12.
Turn key switch to OFF
1.
If sensor closely matched
position. (TM 5-3805-294-10)
ambient air temperature,
problem was not found and
(Volume 5, WP 0794)
may have been missed during
troubleshooting. Restart
procedure at Malfunction 1.
2.
If sensor does not closely
match ambient air temperature
and engine coolant
temperature sensor was
previously replaced, proceed
to Malfunction 8.
3.
If sensor does not closely
match ambient air temperature
and engine coolant
temperature sensor was not
previously replaced, replace
engine coolant temperature
sensor. (Volume 3, WP 0412)
Restore machine to original
condition and operate engine
through normal speed and
load. (TM 5-3805-294-10)
(Volume 5, WP 0794) Clear
and refresh DTCs. (Volume 3,
WP 0362)
1.
Disconnect engine wiring
8.
Engine Wiring
harness connector J03 from
Harness Connector
J03 Has Damage or
ECU. (Volume 5, WP 0800,
Loose Sockets.
Figure 48)
0036-5