TM 5-3805-294-23-1
0036
Table 1. DTC 110.17 - Coolant Temperature Signal Slightly Low - Continued.
Test or Inspection
Corrective Action
Malfunction
1.
Turn key switch to ON position,
11.
Check For DTC
but DO NOT START ENGINE.
110.03 Active
(TM 5-3805-294-10) (Volume
Status With Engine
Wiring Harness
5, WP 0794)
Connector J03
Disconnected.
2.
Refresh DTCs. Many new
codes will be active, only note
if DTC 110.03 is an active
DTC. (Volume 3, WP 0362)
3.
Turn key switch to OFF
1.
If DTC 110.03 is an active
position. (TM 5-3805-294-10)
DTC, problem was not found
and may have been missed
(Volume 5, WP 0794)
during troubleshooting. Install
engine coolant temperature
sensor (Volume 3, WP 0412)
and reconnect all connectors.
Restart procedure at
Malfunction 1.
2.
If DTC 110.03 is not an active
DTC, replace ECU. (Volume 4,
WP 0508) Restore machine to
original condition and operate
engine through normal speed
and load. (TM 5-3805-294-10)
(Volume 5, WP 0794) Clear
and refresh DTCs. (Volume 3,
WP 0362)
END OF WORK PACKAGE
0036-7/8 blank