TM 5-3805-294-23-1
0041
Table 1. DTC 158.17 - Engine Control Unit (ECU) Power Down Error - Continued.
Test or Inspection
Corrective Action
Malfunction
2.
Turn key switch to ON position,
but DO NOT START ENGINE
(TM 5-3805-294-10). (Volume
5, WP 0794)
3.
Clear and refresh DTC's.
(Volume 3, WP 0362)
4.
Disconnect Service
ADVISOR. (Volume 3,
WP 0375)
5.
Turn key switch to OFF
position (TM 5-3805-294-10).
(Volume 5, WP 0794)
6.
Wait 5 minutes, then turn key
switch to ON position, but DO
NOT START ENGINE (TM
5-3805-294-10). (Volume 5,
WP 0794)
7.
Connect Service ADVISOR.
(Volume 3, WP 0375)
8.
Clear and refresh DTC's.
1.
If DTC 158.17 does not appear
as a stored or active DTC,
(Volume 3, WP 0362)
problem corrected. Restore
machine to original condition.
2.
If DTC 158.17 does appear as
a stored or active DTC, it is
possible that another fault
exists or that another
troubleshooting procedure
applies. If this was the first time
through this procedure, restart
procedure at Malfunction 1.
END OF WORK PACKAGE
0041-3/4 blank