TM 5-3805-294-23-1
0047
Table 1. DTC 611.03 - Injector Shorted to Voltage Source - Continued.
Test or Inspection
Corrective Action
Malfunction
Measure resistance (Volume
1.
If less than 10 ohms, proceed
10.
Open Circuit
to Malfunction 11.
Between Engine
3, WP 0369) between engine
Wiring Harness
wiring harness connector J01
2.
If greater than 10 ohms,
Connector J01
socket B1 (Volume 5,
replace engine wiring
Socket B1 and
WP 0800, Figure 46) and
harness. (Volume 4,
Engine Wiring
engine wiring harness
WP 0510) Restore machine to
Harness Connector
connector C01 socket 2.
original condition and perform
C01 Socket 2.
(Volume 5, WP 0800, Figure
Harness Diagnostic Mode
32) Note reading.
Test. (Volume 3, WP 0345)
Measure resistance (Volume
1.
If less than 10 ohms, proceed
11.
Open Circuit
to Malfunction 12.
Between Engine
3, WP 0369) between engine
Wiring Harness
wiring harness connector J01
2.
If greater than 10 ohms,
Connector J01
socket C1 (Volume 5,
replace engine wiring
Socket C1 and
WP 0800, Figure 46) and
harness. (Volume 4,
Engine Wiring
engine wiring harness
WP 0510) Restore machine to
Harness Connector
connector C01 socket 12.
original condition and perform
C01 Socket 12.
(Volume 5, WP 0800, Figure
Harness Diagnostic Mode
32) Note reading.
Test. (Volume 3, WP 0345)
Measure resistance (Volume
1.
If less than 10 ohms, proceed
12.
Open Circuit
to Malfunction 13.
Between Engine
3, WP 0369) between engine
Wiring Harness
wiring harness connector J01
2.
If greater than 10 ohms,
Connector J01
socket D1 (Volume 5,
replace engine wiring
Socket D1 and
WP 0800, Figure 46) and
harness. (Volume 4,
Engine Wiring
engine wiring harness
WP 0510) Restore machine to
Harness Connector
connector C01 socket 3.
original condition and perform
C01 Socket 3.
(Volume 5, WP 0800, Figure
Harness Diagnostic Mode
32) Note reading.
Test. (Volume 3, WP 0345)
Measure resistance (Volume
1.
If less than 10 ohms, proceed
13.
Open Circuit
to Malfunction 14.
Between Engine
3, WP 0369) between engine
Wiring Harness
wiring harness connector J01
2.
If greater than 10 ohms,
Connector J01
socket E1 (Volume 5,
replace engine wiring
Socket E1 and
WP 0800, Figure 46) and
harness. (Volume 4,
Engine Wiring
engine wiring harness
WP 0510) Restore machine to
Harness Connector
connector C01 socket 1.
original condition and perform
C01 Socket 1.
(Volume 5, WP 0800, Figure
Harness Diagnostic Mode
32) Note reading.
Test. (Volume 3, WP 0345)
0047-6