TM 5-3805-294-23-1
0090
TROUBLESHOOTING PROCEDURE
Table 1. DTC 656.02 - Injector #6 Part Number Invalid.
Test or Inspection
Corrective Action
Malfunction
1.
Turn key switch to ON position,
1.
Fuel Injector #6 Part
but DO NOT START ENGINE
Number Check.
(TM 5-3805-294-10). (Volume
5, WP 0794).
2.
Select Readings and select
Connect to Model(s). (Volume
3, WP 0340)
3.
Select Dearborn Protocol
Adapter (DPA 4+) USB for the
Readings Adapter, and select
OK. (Volume 3, WP 0340)
4.
Select Engine Control Unit
(ECU) Only. (Volume 3,
WP 0340)
5.
Select Tests and Calibrations
tab in Service ADVISOR and
select 240DLCR - Excavator -
None. (Volume 3, WP 0340)
6.
Select Connected Calibrations
and select Interactive
Calibrations. (Volume 3,
WP 0340)
7.
Under Interactive Calibrations,
select ECU - (shown with
engine serial number).
(Volume 3, WP 0340)
8.
Under ECU - (shown with
engine serial number), select
Injector Calibration. (Volume
3, WP 0340)
9.
Check part number on injector
data sheet with part number
displayed for fuel injector #6 in
Service ADVISOR.
10.
Select Exit to exit Injector
Calibration, then select Yes.
(Volume 3, WP 0340)
0090-2