TM 5-3805-294-23-1
0090
Table 1. DTC 656.02 - Injector #6 Part Number Invalid - Continued.
Test or Inspection
Corrective Action
Malfunction
2.
Compare inscribed part
1.
If part numbers match and fuel
number on fuel injector against
injector is correct fuel injector
part number data sheet and
for the machine, it is possible
correct part number for fuel
that another fault exists or that
injector.
another troubleshooting
procedure applies. If this was
the first time through this
procedure, restart procedure
at Malfunction 1.
2.
If part numbers do not match or
fuel injector is not correct fuel
injector for the machine,
replace fuel injector #6 with
correct fuel injector for the
machine. (Volume 3,
WP 0408) Restore machine to
original condition. Clear and
refresh DTCs. (Volume 3,
WP 0362)
1.
Turn key switch to ON position,
4.
ECU Faulty.
but DO NOT START ENGINE
(TM 5-3805-294-10). (Volume
5, WP 0794).
2.
Select Readings and select
Connect to Model(s). (Volume
3, WP 0340)
3.
Select Dearborn Protocol
Adapter (DPA 4+) USB for the
Readings Adapter, and select
OK. (Volume 3, WP 0340)
4.
Select Engine Control Unit
(ECU) Only. (Volume 3,
WP 0340)
5.
Select Tests and Calibrations
tab in Service ADVISOR and
select 240DLCR - Excavator -
None. (Volume 3, WP 0340)
6.
Select Connected Calibrations
and select Interactive
Calibrations. (Volume 3,
WP 0340)
0090-4