TM 5-3805-294-23-1
0089
Table 1. DTC 655.13 - Injector #5 Calibration Fault - Continued.
Test or Inspection
Corrective Action
Malfunction
6.
Select Tests and Calibrations
tab in Service ADVISOR and
select 240DLCR - Excavator -
None. (Volume 3, WP 0340)
7.
Select Connected Calibrations
and select Interactive
Calibrations. (Volume 3,
WP 0340)
8.
Under Interactive Calibrations,
select ECU - (shown with
engine serial number).
(Volume 3, WP 0340)
9.
Under ECU - (shown with
engine serial number), select
Injector Calibration. (Volume
3, WP 0340)
10.
Under ECU - (shown with
engine serial number), select
Change To: (Volume 3,
WP 0340)
11.
Re-enter part number from
data sheet for fuel injector #5
in Change To: line below
Current Value for fuel injector
#5 in Service ADVISOR.
(Volume 3, WP 0340)
12.
Re-enter serial number from
data sheet for fuel injector #5
in Change To: line below
Current Value for fuel injector
#5 in Service ADVISOR.
(Volume 3, WP 0340)
13.
Re-enter calibration code from
data sheet for fuel injector #5
in Change To: line below
Current Value for fuel injector
#5 in Service ADVISOR.
(Volume 3, WP 0340)
14.
Select Next. (Volume 3,
WP 0340)
0089-8