TM 5-3805-294-23-1
0119
Table 1. Engine Idles Poorly - Continued.
Test or Inspection
Corrective Action
Malfunction
6.
Under ECU - (shown with
engine serial number), select
ECU - Data List - All. (Volume
3, WP 0363)
7.
Under ECU - Data List - All,
select Throttle Position.
(Volume 3, WP 0363)
8.
Set engine speed dial to
SLOW IDLE (TM
5-3805-294-10). (Volume 5,
WP 0794)
9.
Monitor Throttle Position data
point in Service ADVISOR.
Note reading.
10.
When finished monitoring,
select Readings and select
Disconnect From Model(s).
(Volume 3, WP 0363)
11.
Select Yes to terminate your
readings connection. (Volume
3, WP 0363)
12.
Shut down engine and turn key
1.
If Throttle Position changes
switch to OFF position (TM
are greater than 3%, proceed
5-3805-294-10). (Volume 5,
to Malfunction 12.
WP 0794)
2.
If Throttle Position changes
are 3% or less, proceed to
Malfunction 16.
1.
Remove cab rear tray.
12.
Connector X27 Has
Damage or Loose
(Volume 4, WP 0566)
Pins/Sockets.
2.
Disconnect connector X27.
(Volume 5, WP 0800, Figure
93)
0119-5