TM 5-3805-294-23-1
0119
Table 1. Engine Idles Poorly - Continued.
Test or Inspection
Corrective Action
Malfunction
5.
Turn key switch to OFF
1.
If between 0.3 - 1.0 volts,
position (TM 5-3805-294-10).
proceed to Malfunction 15.
(Volume 5, WP 0794)
2.
If not between 0.3 - 1.0 volts,
replace right-hand console
switch panel. (Volume 4,
WP 0525) Restore machine to
original condition.
1.
Disconnect connector X30.
15.
Connector X30 or
X31 Has Damage or
(Volume 5, WP 0800, Figure
Loose Sockets.
96)
2.
Disconnect connector X31.
(Volume 5, WP 0800, Figure
97)
3.
Visually inspect connectors
1.
If damaged or has loose
X30 and X31 for damage and
sockets, replace cab wiring
loose sockets.
harness. (Volume 4,
WP 0504) Restore machine to
original condition.
2.
If not damaged and does not
have loose sockets, replace
main controller. (Volume 4,
WP 0517) Restore machine to
original condition.
1.
Perform Engine Intake and
16.
Intake and Exhaust
Exhaust Valve Adjustment.
Valves Out of
Adjustment.
(Volume 3, WP 0414)
2.
Turn key switch to ON position;
START ENGINE (TM
5-3805-294-10). (Volume 5,
WP 0794)
3.
Set engine speed dial to
SLOW IDLE (TM
5-3805-294-10). Note engine
performance. (Volume 5,
WP 0794)
0119-7