TM 5-3805-294-23-1
0130
Table 1. High-Pressure Fuel Supply System Test - Continued.
Test or Inspection
Corrective Action
Malfunction
Measure resistance (Volume
1.
If less than 10 ohms, replace
31.
Short Circuit
engine wiring harness.
Between Engine
3, WP 0369) between engine
Wiring Harness
wiring harness connector J03
(Volume 4, WP 0510) Restore
Connector J03
socket G1 (Volume 5,
machine to original condition.
Socket G1 and
Clear and refresh DTCs.
WP 0800, Figure 48) and a
Ground.
known good ground. Note
(Volume 3, WP 0362)
reading.
2.
If greater than 10 ohms,
proceed to Malfunction 32.
Measure resistance (Volume
1.
If less than 10 ohms, replace
32.
Short Circuit
engine wiring harness.
Between Engine
3, WP 0369) between engine
Wiring Harness
wiring harness connector J03
(Volume 4, WP 0510) Restore
Connector J03
socket G2 (Volume 5,
machine to original condition.
Socket G2 and
Clear and refresh DTCs.
WP 0800, Figure 48) and a
Ground.
known good ground. Note
(Volume 3, WP 0362)
reading.
2.
If greater than 10 ohms,
proceed to Malfunction 33.
Measure resistance (Volume
1.
If less than 10 ohms, replace
33.
Short Circuit
engine wiring harness.
Between Engine
3, WP 0369) between engine
Wiring Harness
wiring harness connector J03
(Volume 4, WP 0510) Restore
Connector J03
socket C1 and all other sockets
machine to original condition.
Socket C1 and All
on engine wiring harness
Clear and refresh DTCs.
Other Sockets on
connector J03 (Volume 5,
(Volume 3, WP 0362)
Engine Wiring
WP 0800, Figure 48). Note
2.
If greater than 10 ohms,
Harness Connector
reading.
proceed to Malfunction 34.
J03.
1.
Turn key switch to ON position,
34.
Short Circuit
but DO NOT START ENGINE
Between Engine
(TM 5-3805-294-10). (Volume
Wiring Harness
Connector J03
5, WP 0794)
Socket C1 and
Ground.
2.
Measure voltage (Volume 3,
WP 0369) between engine
wiring harness connector J03
socket C1 (Volume 5,
WP 0800, Figure 48) and a
known good ground. Note
reading.
0130-13