• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
Table 1. Low-Pressure Fuel Supply System Test - Continued
Table 1. Low-Pressure Fuel Supply System Test - Continued

Maintenance Manual For Hydraulic Excavator Type 1 With Hydraulic Thumb And Quick Latch -1 Page Navigation
  908    909    910    911    912  913  914    915    916    917    918  
img
TM 5-3805-294-23-1
0131
Table 1. Low-Pressure Fuel Supply System Test - Continued.
Test or Inspection
Corrective Action
Malfunction
4.
Shut down engine (TM
1.
If any fuel lines are leaking,
5-3805-294-10). (Volume 5,
refer to the following for fuel
line replacement.
WP 0794)
Fuel Leak-Off Lines
Replacement. (Volume 3,
WP 0426)
Low-Pressure Fuel
System Hoses
Replacement. (Volume 3,
WP 0481)
Fuel Injectors Supply
Lines and Flow Restrictors
Replacement. (Volume 3,
WP 0425)
Primary Fuel Filter/Water
Separator Head
Replacement. (Volume 3,
WP 0441)
Final Fuel Filter/Water
Separator Replacement.
(Volume 3, WP 0441)
Restore machine to
original condition.
2.
If no leaks were found,
proceed to Malfunction 9.
1.
Turn key switch to ON position,
9.
Check Operation of
but DO NOT START ENGINE
Electric Fuel
(TM 5-3805-294-10). (Volume
Transfer Pump.
5, WP 0794)
2.
Feel and listen for electric fuel
transfer pump (Volume 5,
WP 0800, Figure 34) running.
Pump should be running within
60 seconds after ignition is
turned ON.
3.
Turn key switch to OFF
1.
If pump runs, proceed to
position (TM 5-3805-294-10).
Malfunction 24.
(Volume 5, WP 0794)
2.
If pump does not run, proceed
to Malfunction 10.
1.
Disconnect connector C32
10.
Connector C32 Has
from low-pressure fuel pump.
Damage or Loose
Sockets.
(Volume 5, WP 0800, Figure
34)
0131-4


Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved.