TM 5-2420-230-24-1
Table 3-1. Unit Level Preventive Maintenance Checks and Services (PMCS) for IHMEE. -- Continued
Item to be
Item
Checked or
Not Fully Mission
No.
Interval
Serviced
Procedure
Capable If:
Semiannual
Preservice Checks --
Continued
Do not hold steering wheel at full left or full
right for more than 10 sec. Oil overheating
or pump damage can occur, resulting in
damage to equipment.
b. With vehicle stopped and engine running, Hard steering is evident.
turn steering wheel to extreme left, then to
extreme right to check for hard steering.
Engine-governed speed (no
c. Check engine operation at all speeds.
Ensure engine-governed speed (no load) is load) is below 2,175 RPM
or exceeds 2,275 RPM.
between 2,175-2,275 RPM.
d. Raise FEL and support it with maintenance
e. Shut OFF engine (TM 5-2420-230-10).
f. Jack vehicle and place on safety stands
g. Remove belly plates (TM 5-2420-230-10).
h. Open hood (TM 5-2420-230-10).
i. Remove engine access panel
j. Remove hydraulic reservoir step plate
k. Remove fuel tank step plate (Para 13-14).
l. Remove firewall from inside cab
m. Release parking brake to position all hubs
for checking proper oil level and set
parking brake (TM 5-2420-230-10).
3-5