TM 5-2420-230-24-1
a. Removal.
NOTE
Tag all hoses, wires, and tubes and note their positions before removal.
Remove cable ties as necessary.
Ensure all hoses, wires, and tubes are disconnected and clear before removal.
Cap and plug all tubes, hoses, and fittings upon removal.
(1)
Deleted.
(2)
Remove two hoses (2) and fittings (3) from oil cooler housing (4).
(2.1) Remove two hoses (2) and fittings (4.1) from oil filter head (4.2).
(3)
Loosen clamp (5) and remove upper engine coolant hose (6) from water outlet (7).
(3.1) Remove straight adapter (7.1) and bushing (7.2) from engine block (7.3).
(4)
Remove coolant temperature sending unit (8) from engine block (7.3).
(5)
Remove elbow (9) and adapter (9.1) from engine block (7.3).
(6)
Remove bolt (9.2) and ground wire (10) from engine block (7.3).
(7)
Remove three bolts (11) and washers (11.1) securing heat shield (11.2) and transmission oil cooler bracket (12).
(8)
Remove bolt (12.1), lockwasher (12.2), and washer (12.3) securing negative ground wire (13) to engine
block (7.3). Discard lockwasher.
Change 1
4-23