TM 5-2420-230-24-1
Drive shafts are heavy. Ensure no personnel
are under a drive shaft when it is removed.
Failure to comply could result in serious
injury or death to personnel.
(31) Position rear drive shaft (26), align scribe
marks, and install eight bolts (25),
washers (24), and new self-locking nuts (23).
Tighten nuts to 38-48 lbf/ft (52-65 Nm).
(32) Uncage brake chamber (Para 8-8).
(33) Jack vehicle and remove jack stands.
(34) Lower vehicle.
(35) Position front drive shaft, align scribe marks, and install two retaining straps (18) and four bolts (17) securing
drive shaft to yoke (19).
(36) Install eight bolts (22), washers (21), and new self-locking nuts (20). Tighten nuts to 38-48 lbf/ft (52-65 Nm).
Change 1
4-19