TM 5-2420-230-24-1
(2)
Select Mode 1 on loader mode selector.
(a)
Hold down return-to-dig button (7) and move
control lever (8) forward.
(b)
Release control lever (8).
(c)
Arms should lower to 15-24 in. (40-60 cm)
from ground.
(d)
Bucket should be closed and positioned
horizontally.
(e)
Float position indicator lamp (6) should flash.
(f)
Press return-to-dig button (7) again, without
moving control lever.
(g)
Arms should lower to ground, and bucket
should reach ground in horizontal position.
(h)
Float position indicator lamp (6) should stay lit.
(i)
Raise loader arms to maximum height.
(j)
Float position indicator lamp (6) should go out.
(k)
Turn bucket completely forward (dumping).
(3)
Select Mode 2 on loader mode selector (9).
(a)
Hold down return-to-dig button (7) and move control lever (8) forward.
(b)
Release control lever (8).
(c)
Arms should lower to ground.
(d)
Bucket should be closed and positioned horizontally.
(e)
Float position indicator lamp (6) should stay lit.
(f)
Open and close bucket without touching arms.
(g)
Float position indicator lamp (6) should stay lit all this time.
(h)
Raise loader arms to their maximum height.
(i)
Float position indicator lamp (6) should go out.
(j)
Turn bucket completely forward (dumping).
Change 1
10-59