TM 5-2420-230-24-1
b. Installation.
(1)
Install two pressurizer mounting bands (4), four
bolts (11), washers (12), and new self-locking
nuts (13).
(2)
Install pressurizer tank (7).
(3)
Install hose clamps (14) and (15).
(4)
Install pressurizer tank adapter assembly (9)
and pressurizer tank gasket (10).
(5)
Install four bolts (5) and washers (6) on
pressurizer tank (7).
(6)
Install two bolts (1), washers (2), and nuts (3)
from two pressurizer mounting bands (4).
Remove all jewelry such as rings, dog tags,
bracelets, etc. If jewelry or tools contact
positive electrical circuits, a direct short may
result. Damage to equipment and injury or
death to personnel may occur.
(7)
Connect electrical connector (8).
c. Follow-On Maintenance.
(1)
Place electrical master switch in ON position (TM 5-2420-230-10).
(2)
Functionally test pressurizer (TM 5-2420-230-10).
(3)
Remove "Do Not Operate" tag from ignition switch (TM 5-2420-230-10).
END OF TASK
Change 1
19-13