TM 5-2420-230-24-1
Maintenance & Service Manual
R & HR32000 3 & 6 Speed LD
4TH SPEED CLUTCH
REASSEMBLY
(8 speed transmission only)
Figure 15
Install new clutch piston inner and outer sealing rings. Insert
clutch piston in clutch drum. Use caution as not to damage
sealing rings.
Figure 12
Install clutch shaft bearing. NOTE: Bearing snap ring groove
must be down.
Figure 16
Install clutch piston return spring, spring retainer and retainer
snap ring. Install one friction disc. Alternate steel and friction
discs until the proper amount of discs are installed. First disc
next to piston is friction, last disc installed is friction. (8 friction -
Figure 13
7 steel).
Install bearing retainer ring.
Figure 14
Figure 17
Install piston rings as explained on page 79.
Install end plate.
--95--
